yellobrik® 19” 1RU Rack Frame
The RFR 1000-1 is a compact 1 RU high mounting frame designed for yellobrik®s. Up to 14 yellobrik®s can be vertically mounted and are mechanically clamped securely in place. Each slot has its own integrated power connector on a central power bus.
The rack has two external 12VDC inputs for power, one for primary power, the second for redundant backup. An optional external power brick is available which provides enough power for any combination of yellobrik®s. A second unit can be used for redundant backup.
Primary and redundant power LEDs are located in the front panel as well as GPO connections for the power supply failure alarms.
While the frame will accommodate all yellobrik®s, it is ideally suited for the yellobrik® fibre converters, which are typically used in larger numbers. fibre connections are on the front and the SDI copper connection in the rear. A space is left open on one side to route the fibre loops from front to rear making for a very clean installation. The module fibre RX and TX activity LEDs can be seen clearly from the front with the modules installed. To protect the fibre cables and connections the 19” mounting brackets can be repositioned to recess the rack frame.
- Compact 1 RU design
- Will accommodate up to 14 yellobrik®s
- External 12VDC power inputs
- Primary and redundant power options
- Power failure alarm GPO outputs
- Power failure alarm GPO outputs