Fibre Optic Banner

What are achievable distances single mode vs multimode fibre?

This document explains the differences between Multi-mode and Single-mode fibre and shows the maximum distance you can expect for different data rates from 100Mb to 40GbE on OM1, OM2, OM3, OM4 and OS1 fibre types.

Fibre Optic Cable Overview

types of fibreFibre cables vary enormously, in the type of fibre, the construction and materials and the number of fibres present. Optical fibres are extremely thin strands of very high purity silica (glass), which transmit light from one end to the other with minimal loss.

Types of Fibre
There are two primary types of fibre - multimode and singlemode.

types of fibreMultimode fibre can carry multiple light rays (modes) at the same time by having varying optical properties at the core; essentially light travelling the shortest path (down the middle) travels the slowest.

The larger core simplifies connections and takes advantage of the lower cost LED & VCSEL technologies which operate in the 850nm window.

Due to dispersion the range is limited so it tends to be used as premises cabling when less than a kilometre. It comes in two core sizes, 62.5 and 50 microns.

types of fibreSinglemode fibre has a much smaller core size of 9 microns and has a single light path and can travel much longer distances of up to 100km.

The require more expensive electronics which operate in the 1310 and 1550nm windows and are typically used in longer distance LAN's, Cable TV and telephony applications

Fibre Optic Cable Transmission Distances
These are the typical distances achieved with each fibre type, however some cable manufacturers offer enhanced cables which exceed these, sometimes referred to as OM1 Plus, OM2 Plus etc. The table below shows distances for ratified standards only.

There are some exceptions to these distances.

1. You can extend the distance on all multi mode fibre optic cables for Gigabit to 2km with propriety cabling installed and additional performance is required.
2. By using singlemode modules and a mode conditioning cable, you can increase the range on OM1 fibre optic cable to 550m.

62.5/125 OM1
200MHz
(850nm)
50/125 OM2
500MHz
(850nm)
50/125 OM3
1500MHz*
(850nm)
50/125 OM4
3500MHz*
(850nm)
9/125 OS1
(1310nm)
100Mb
2km
2km
2km
2km
40km
1Gb
275m
550m
800m
1100m
100km
10Gb
33m
82m
300m
550m
40km
40Gb / 100Gb
-
-
100m
125m
40km

*overfill launch bandwith

If you need any further help or advice please give us a call on 0844 846 0440 or fill in our Contact us

Take a look at our range of Fibre Optic Cables

PDF Icon Download in PDF format

Basket Information
Your basket contains 0 items for a total of £0.00
Reviews of universalnetworks.com